Tours Travel

Vietnamese Spring Rolls Recipe (Goi Cuon)

admin

This Goi Cuon or Traditional Vietnamese Spring Roll recipe took a lot longer than I expected, but I learned a lot while making the rolls. These healthy muffins are packed with fresh vegetables and lean meat, so eat up!

Made from just rice and water, neutral banh trang (rice paper) can easily be used in a variety of ways. In a Vietnamese market, I found no less than five brands of banh trang (rice paper) with multilingual packaging:

Vietnamese, Chinese, English and French.

Banh trang moves. Cambodians have a similar roll that also uses the same rice paper called nime chow, made without meat and dipped in a vinegar-based sauce instead of hoisin. The Chinese have a version with duck and cucumber with a hoisin-based dipping sauce. Japanese restaurants also commonly use regular and dyed versions of rice paper for rolls.

For the meat, you can really use any cut of pork you like, but leaner works better. Shrimp can also be any size, but a medium size helps make it easier to roll.

At the bottom of this post you will also find a recipe for Vietnamese Nuoc Cham/Spring Roll Sauce.

This recipe makes about 10 spring rolls.

What do you need:
-1/2 pound prawns (size 36/40) (453g)
-1/2 pound pork leg (453g)

-1 head of red or green leaf lettuce
-a few sprigs of mint
-scallion

-banh trang (rice paper/spring roll wrapper)
-bun (rice noodles, the non-starchy variety)

-1 1/2 teaspoon of salt
-1 teaspoon of sugar

Nuoc cham recipe (Vietnamese sauce recipe, Spring Roll sauce)
-1 tablespoon of Hoisin Sauce
-2 tablespoons of water

Preparation time: 25-40 minutes
Time to cook: 50 minutes
Assembly time: 10-20 minutes

If your shrimp are frozen, thaw them in a bowl of water until thawed so you can slice them.

1. Split and become shrimp. It helps to have a sharp knife and a steady hand. I had to pull up a chair to understand this. I also found it helpful to have a bowl of water to soak the nasty stuff in.

2. Cook the pork: fill a small pot with water about 1.5 inches above the pork, add 1 teaspoon salt and 1 teaspoon sugar. Bring to a boil over high heat and then lower to 60% for about 30 minutes. It is done when it floats or when it is no longer pink in the middle.

3. Cook the shrimp: Fill a small pot with about 2 inches of water (enough to cover the shrimp). Add 1/2 teaspoon of salt and bring to a boil. Add the shrimp. Boil for about 1.5-2.5 minutes at 70% temperature until the shrimp are no longer translucent in the middle. It will be quick, so don’t go anywhere!

4. Remove shells and tails and clean any remaining shrimp intestines. Cut the shrimp in half along the body. Try to imagine how you want to layer the pork inside the roll so you know how to cut it. Slice as thin as possible for easier rolling.

Tortuna brand bun (rice noodles) and Flying Horse brand banh trang (spring roll wrapper, rice paper).

5. Bring 1 gallon of water to a boil. Add 1/3 of the package of rice noodles and boil for 8 minutes (following package directions).

6. Drain and cool the noodles under cold running water to prevent cooking.

7. Wash and dry your vegetables!

8. Add some warm water to a plate to wet the banh trang (rice paper).

9. Wet just before making each roll. It took me about 5-10 seconds of soaking. Be sure to remove it before it reaches your desired softness to make it easier to handle.

10. The technique of rolling is totally up to you. Do what feels good to you or makes you happy. Put in less than you think you need so the rolls don’t burst. Usually it will look better to display lettuce rather than noodles on the bottom. A tighter roll will look better, and displaying the meat on top makes it more attractive. This is what I did:

10 a.m. Add some lettuce near the bottom and leave about 1″ to 1.5″ space on the sides. Layer with some mint and some chives.

10b. Add the shrimp near the center, colored side down.

10c. Add pork on top of the shrimp and some bun (rice noodles) on top of the vegetables. Make sure the rice noodles are evenly distributed.

10d. Fold the sides in to make it snug and add a little more chives. Then fold the base up to cover the rice noodles. You want to keep the roll snug, so squeeze it slightly as you roll it up. Once you get to the meat, loosen the tension so it doesn’t break.

11. Nuoc cham recipe (Vietnamese sauce recipe):

Add 1 tablespoon of hoisin sauce and 2 tablespoons of water to a small saucepan and bring to a boil. Transfer to a bowl and cool. Add chopped walnuts and some hot sauce. I used Koon Chun hoisin sauce and Sambal Oelek chili paste (the one without the garlic!).

Attend!

Arts Entertainments

Different ways to promote yourself as a model

admin

A model who is truly passionate about pursuing modeling as a long-term career has to take steps to continually promote themselves and stay relevant in the industry.

Make your poses correct

Learn the tricks and secrets so you can quickly achieve a good variety of poses to suit the project you’re doing. Master basic posing tips, such as keeping your chin down, twisting your body two-thirds away from the camera, bringing your ears forward, placing your eyes in line with your nose, not posing straight but at least one leg bent, and opening slightly the mouth to provide a subtle seductive pose. These are some basic tips that once mastered add beauty to any photo very easily.

Another pro tip is to learn to smile with your eyes. Have you heard of smize? Look at Tyra Banks as she flatters her eyes. Your eyes are often the center of attention in photos and are what viewers will look at to infer the emotion of the photo. Your eyes, like a painting, speak more than a thousand words, so learn to use it well.

Social Networks and Instamodeling

Use the power of social networks in your favor. Scouters from all modeling agencies and clients are constantly looking for high-quality models on social media platforms. Create a casual account where you post your selfies, your normal social life, and give some updates on your best work to show your followers more about your life as a model. Don’t create a pro model account that’s full of professional studio-quality photos, as clients are more interested in seeing what you post when you don’t expect them to see it. In addition, it is a platform for you to show your personality. Be vibrant and socially friendly with your captions in that regard. Use appropriate and popular hashtags like #outfitoftheday, #Singaporemodel, etc.; this will help your photos have more reach.

Create a website

If you are serious about modeling and attracting clients, setting up your own website is one of the best ways to go. With many free web hosting platforms like Wix and WordPress, you can easily set up a website that will help you market your modeling brand. But if you do, make sure you have a number of meaningful experiences that you can brag about on the website.

The biggest connection wins

Modeling is an industry where soft skills get the biggest prizes. If you can socialize and interact with the best clients and Bookers, you will see more opportunities coming your way. Find out about the latest fashion shows, parties and corporate events in the city and try to get your ticket. Wear your best dress and impress.

With stunning looks and an outgoing personality, you are sure to get the opportunities you are looking for.

Technology

Best Flat Screen TV Reviews

admin

Samsung LN52A650 52-Inch 1080p 120Hz LCD HDTV with Red Touch

Samsung adds a splash of color to an ultra-fast 4 ms response time and rich connectivity features to redefine the role of HDTVs in the home with its Series 6 (A650) and Series 7 (A650) LCD HDTVs. A750) with a vision of the future. Utilizing the award-winning technologies found in all Samsung HDTVs, the Series 6 and 7 HDTVs deliver unparalleled picture quality and enhanced connectivity and networking capabilities that create a true entertainment center for any home. The 7 Series takes network and multimedia management to a whole new level. Consumers can easily enjoy MPEG and JPEG files stored on external devices by connecting them via side-mounted USB 2.0, turning their LCD into a full-scale home viewing gallery, or connecting their MP3 players to enjoy a dynamic audio.

Samsung LN40A550 40-Inch 1080p LCD HDTV

Samsung’s 550 series is a perfect way to step up to Full HD 1080p resolution. A fast 5 ms response rate produces smooth-moving scenes for sports and action movies, and a 30,000:1 dynamic contrast ratio produces deep blacks and sharp lines (15,000:1 on 32-inch and 37-inch models) . Excellent connectivity and networking with a USB port and 3 HDMI 1.3 ports with Consumer Electronics Control (CEC) means these HDTVs work well with all your other electronic devices. Easily enjoy MPEG and JPEG files stored on external devices by connecting them via the side-mounted USB 2.0, turn your LCD screen into a full-scale home viewing gallery, or plug in your MP3 player for a dynamic audio experience.

Panasonic Viera TH-50PZ800U 50-Inch 1080p HD Plasma TV

With its 2008 Panasonic Viera Plasmas, Panasonic brings a staggering 1,000,000:1 contrast ratio to the table. advanced pixel resolution and image processing technology with the natural ability of plasma TV to beautifully reproduce fast-moving images, so every detail is rendered with stunning clarity and all the action is conveyed with a high degree of fluidity .

What’s new this year?

Super Contrast: The native contrast ratios of the PZ85, PZ800 and PX 850 series are 30,000:1, double last year’s 15,000:1. Dynamic contrast ratios are up to 1,000,000:1.
new anti-reflection filter; Lead-free “Tough Under Force” panel is impact and scratch resistant

Integrated SD card slot with Photo Viewer/Gallery Player software
xv Color and Deep Color (HDMI 1.3 features)
24p native playback
Game mode automatically sets the right picture quality for gaming and includes anti-image retention.
Viera Link is now compatible with Onkyo and Yamaha home theater systems

At least 3 HDMI inputs on all models (4 on PZ800 and PZ850 series)
THX certification on the PZ800 and PZ850 series

Sony Bravia L-Series KDL-32L4000 32-Inch 720p HD LCD TV

How about a Sony BRAVIA HDTV that has legendary Sony quality at a price anyone can afford? That’s what the KDL-32L4000 HDTV stands for. Two HDMI connections mean this HDTV can connect to the latest HDMI-enabled sources. Add to that two more component inputs and a PC input, and you have five ways to get HD-quality entertainment on your TV. With wide viewing angles and fast panel response time, and a beautiful gloss black color with chrome accents, now everyone can enjoy video entertainment no matter where they’re sitting and what they’re watching.

32″ Widescreen HDTV (16:9 aspect ratio) * Semi-gloss black finish with chrome accents * Built-in digital (ATSC) and analog (NTSC) tuners for over-the-air TV broadcasts (antenna required) * Built-in QAM cable TV tuner receives unscrambled programs without a cable box (cable service required) * 1366 x 768 pixels * 2 component video (accepts signals up to 1080i) *

Sylvania LC195SL8 19-Inch 720p HD LCD TV

19″ LCD TV with PC input. Ideal for bedrooms and video games.
The Sylvania LC195SL8 is a 19″ 720p Resolution LCD HDTV. This flat panel LCD TV has a 19″ screen, measured diagonally from corner to corner. This screen size is perfect for viewing from 3′ to 5′ away. A resolution of 1440 x 900 means that this TV has 900 rows of pixels vertically. The more pixels a television has, the clearer the images it can produce.

HDTV screen with PC input
Digital tuner
1440 x 900 resolution
Downloadable Rated V-Chip

Samsung LN32A450 32-Inch 720p LCD HDTV

Enjoy HD clarity in a stunningly modern design with a unique bezel and frame to match your décor. True 720p resolution offers incredible LCD picture detail, complemented by a 10,000:1 dynamic contrast ratio for vivid colors and deep blacks. Three HDMI inputs allow you to quickly and easily connect to your peripherals. Access a variety of menu options and preferences through a smart user interface. Speaking of smart, cleverly hidden speakers ensure a sleek, clean look that fits in with almost any setting. TruSurround delivers a compelling virtual surround sound experience through any two-speaker playback system, including internal TV speakers and headphones. It is fully compatible with all multichannel formats up to 5.1 channels Reception of stereo broadcasts (MTS and SAP) with a capacity of 181 channels. Hidden bottom speakers with 10 watts x 2 audio power SRS TruSurround XT: TruSurround is a patented SRS technology that solves the problem of playing multi-channel 5.1 content on two speakers V-Chip allows blocking of certain rated TV shows and movies by parents unacceptable content Trilingual on-screen displays in English, Spanish, or French HDMI-CEC allows control of peripheral devices, such as a DVD player, with the TV remote Automatic wall mount compatible Channel coverage: VHF 2-13, UHF 14-69 and CATV 1-125 (up to 181 preset channels) Antenna – CATV/VHF/UFH 75 ohm, Type F Connections – High Definition Multimedia Interface 3 HDMI (2 rear, 1 side), 2 rear component (Y /Pb/ Pr), Rear RF In, Side S-Video In, Composite AV (Rear, Side), Side Headphone, Rear PC D-sub, Rear Optical Audio Out, RS232 po Front and Side HDMI-CEC Dimensions – W 31.5 x H 20.7 x D 3.7 / 31.5 x 22.7 x 9.9 with stand Weight – 24.0 lbs / 28.9 lbs with stand.

Pioneer KURO PDP-5020FD 50-Inch 1080p HD Plasma TV

Enter the next generation of Pioneer KURO, where a picture is worth a thousand words. Awaken your senses and discover that there is more to this TV than meets the eye. Deeper black levels that pave the way for stunning detail, added dimension and more vibrant color are just the beginning. Optimum Mode automatically analyzes and adjusts audio and video settings based on specific lighting conditions in the room and the type of light and color. Program content is also precisely controlled and fine-tuned so that movies, sports and news are faithfully reproduced. Smooth Film mode eliminates motion blur in 3:2 Pulldown (60 Hz), providing smooth and natural reproduction of film content. Detachable bottom speaker with fully integrated digital amplifier for pristine sound clarity and accuracy 4 independent HDMI 1.3 inputs with HDMI-CEC control and the ability to accept 1080p 24/60 Hz signals Ambient light sensor for automatic picture adjustment Standard 3 – 2 (60 Hz) and advanced PureCinema with 3 – 3 (72 Hz) pulldown for accurate playback of movie content Fully integrated ATSC and NTSC tuner with Clear QAM Supported formats: Video: WMV9, MPEG1, MPEG2-PS, MPEG2- TS, MPEG4 (SP/ASP), and MPEG4 (H.264/AVC) Audio: WMA9, MP3, Linear PCM (WAV), HE-AAC, and MPEG-4 AAC Photos: JPG, PNG, GIF, TIFF, and BMP 4 HDMI 1.3 standalone (1 side, 3 rear) with PC mount, 2 with analog audio, 1 component, 3 composite, 1 S-Video antenna, USB (Mass Storage Class), LAN (10/100 Base-T — Ethernet) and PC input Optical Digital Audio (Dolby Digital/PCM), Audio LR, Subwoofer, SR and Headphone out x 3-21/32 with Speaker Weight: 74lbs 1oz/86lbs with speaker and stand.

Business

Easy Guide to Faxing Over the Internet – Learn About Sending Faxes by Email

admin

Easy guide to faxing over the internet – learn more about sending faxes by email
There are many Internet fax services that allow you to send your faxes over the Internet. It is a type of online services that provide subscribers with the ability to send and receive faxes without a fax machine. Instead, Internet access and an email account are all you need. Internet faxes are received or sent as email attachments or regular copies from fax machines.

Some of these internet fax services are free while others require you to pay a certain amount of money on a monthly basis. Some of the examples of internet fax services include: eFax, Call Wave internet fax, Green Fax, Trust Fax, Fax it Nice, Fax Mate, Inter Fax, Air Com email fax and My Fax.

How does Internet fax normally work?

To send an Internet fax, the subscriber creates an email account. The content of the fax can be written in the body of the email and attachments are usually allowed. The destination fax number is entered in the ‘To’ field, along with the name of the Internet fax service (eg efax). For example, if the fax number was 1-555-234-5678, the email would be addressed to [email protected]. In the Subject field, the user must enter the name of the recipient, for example: Attention: Mr. Fax.

Receiving faxes over the Internet is easy; You do not need to be familiar with faxing software or fax machines or to use the Internet faxing interface. Typically, email fax services will install a small tool (toolbar or window box) on your PC as a plug-in within the email program. Once received, an automated program converts the email to a fax format and then faxes it to the number provided in the fax header. The recipient receives the fax normally, through a fax machine.

Why Internet Fax?

There are numerous reasons to start implementing Internet fax services for your business or personal use. If you’ve ever owned a fax machine, then you can understand how frustrating it can be when it jams, cuts off text on the page, stops in the middle of a transmission, or the receiving machine is constantly busy or out of paper. Eventually, you could ruin your own business due to all those communication problems caused by traditional fax machines. Life with Internet faxing (or sometimes known as email faxing) will be so much easier: ready 24 hours a day, no more rings to answer, and no more paper jams. Faxes will always be sent to and arrive seamlessly through your email account.

Perhaps you’ve never owned a fax machine because the initial investment and ongoing maintenance were too expensive. Think about it: the cost of the machine, installing a separate phone line to avoid conflicts with your answering machine, and the ongoing cost of replacement toner cartridges. With the invention of eFax services, you now never have to worry about these headaches with the soon-to-be-extinct fax machine device.

Some get internet fax services because of its added benefits. Take eFax (owned by J2 Communication) as an example. They are offering more than just internet fax solutions these days. With the recent introduction of their new product: eVoice, you can even have voice messages sent to your email accounts or forwarded to your private number. With eVoice, even the smallest businesses can now benefit from a professional answering service and save costs on answering machines and additional phone lines.

In short, Internet services are one of the online services that can greatly benefit your business or personal expenses. However, to get the best out of it, you should be careful and check more of the fax services available in the market. Different Internet fax packages are intended for different categories of users. If you only need to receive faxes, you can try eFax Free, which will cost you nothing; If you fax frequently and need a toll-free phone number for your business, eFax Plus might be something you want to consider. If you are always on the go and need to send faxes by email through the mobile portal, Call Wave’s fax services are recommended. To see more about CallWave services: [http://www.downloadcallwave.com;] to see more about eFax services: http://www.myinternetfax.biz

Learn more about the details of the services when shopping for the right internet fax services: reputation and customer feedback on the services, ability to send to more than one fax number at a time, page capacity number of faxes, the send/receive page, the quantity limit, and the hidden cost of sending additional faxes are a few factors you don’t want to miss out on.

Home Kitchen

Decorate the home with fabulous handmade tile designs

admin

Antique tile design has many homeowners interested and also the rustic approach it inspires with open spaces amidst the crowded lives we live today. Floral designs are also attractive and occupy many areas. An imaginary world, perhaps, with cartoon characters that will surely appeal to the youngest.

The difference lies between commercial manufactured art and authentic reproductions made by hand from a mold in the exact shape required. Going back has its advantages. The vintage is in high demand, although patterns may also come from modern cultures.

Ethnic concerns drive tourists from around the world not only to look at the spectacular sights, but also to build bridges with native cultures. That is the reason why such ethnic clothing is sold all over the world and is inspired by the Middle East, Africa, Asia and Europe as some prominent examples. Everything that is new and unknown immediately attracts attention and curiosity.

A mosaic resembling frescoes.
Give life and color to the walls with handmade tiles! Eyes and senses, emotions and feelings must be tired after decades of staring at dumb, lifeless walls. Although many prefer monochromatic walls and floors, aren’t we all tired of grays and browns, whites and yellows? Even if you like minimalist environments, maybe they could be applied to some parts of the home, like the office space.

Enter an infinite world of fantasy
Textile artists also create mosaic designs as the purpose is similar. The patterns and colors are carefully printed on the handmade tiles. More complicated patterns would also be hand painted. Glass and ceramic are two materials that could create a wide variety of beautiful hand-painted tile designs. Like all kinds of crafts, they will not be exact replicas of each other.

The same principles that apply to ceramics are painstakingly imprinted on the tiles. The result is a wonderful world that stretches the imagination. Visualize each day spent in that glorious presence. If you’ve admired such environments in businesses, airports and shopping malls, a little bit of that heaven could be installed in the home, perhaps in the living room.

Decide on the location and extent of the handcrafted tiles you want to install in the home. Nature and wildlife, surreal and human worlds are all possible. Glazed murals decorate many chapters in public life, such as around fountains and in billboards. Use them indoors or outdoors. They would create a stunning setting around fireplaces and on countertops and backsplashes, perhaps in the pool area as well.

Auto

Truck driver retention rate is controlled by the industry

admin

The American Trucking Association provides up-to-date reports as truck driver turnover increases, saying it bodes well for the industry. The most common reason is that it is due to higher freight volumes and stricter regulations, such as the CSA, causing the need for more qualified drivers.

In an industry where driver turnover has averaged well above 100%, current fourth quarter numbers showed a drop to 88% as the economy is still trying to recover. However, this percentage is expected to increase as volume and regulatory changes continue.

The ATA and motor carriers believe that a higher rate of driver turnover is a good thing. It shows a stronger increase in freight transportation and demonstrates to the FMCSA and Washington bureaucrats that more regulations, like NAFTA, are needed to make up for the lack of qualified drivers in the United States. The national media, which doesn’t understand trucking in the real world, believes all the rhetoric and publishes it as serious trucking news.

The turnover rate among professional truckers, especially those in long-haul operations, is also said to be verifiable due to evidence of drivers leaving the employment of one motor carrier in search of a better job with another. The media is told that drivers are looking for another carrier that offers better wages, better miles, more time at home, etc., thus creating a driver shortage problem, which in turn results in a problematic driver retention rate . To the driver, this rotation is often referred to as “shake” and “work jump.” The problem, however, is that most major motor carriers operate the same way, so for the driver, the grass is rarely greener on the other side.

As an example, as required by the US Department of Labor, for the cross-border trucking initiative to come into play and for US motor carriers to apply for Foreign Labor Certification, they first had to demonstrate that there were insufficient qualified American truck drivers available and willing to perform the job at current wages. This was easily accomplished by low-wage motor carriers using students and new drivers as a source of cheap labor, causing drivers to sit unpaid waiting for cargo and drivers lost driving time. sitting for hours without pay on the docks of shippers and receivers. .

As drivers left the job, the industry could point to driver loss as confirmation of a driver shortage, and when the CSA took hold, this regulation could be used as evidence of a low driver retention rate, as many experienced drivers left the industry for good; it’s not really due to the CSA, but rather the actions of the motor carriers mentioned above. All that needed to be done was for the major trucking organization to announce to the media that America was now facing a driver shortage and retention crisis.

The trucking media, both published and online, are always eager to share the vital news within the industry regarding a crisis. The problem is that many of these outlets are controlled by the same organizations spouting the rhetoric. The media, nationally, run with the stories, having no real-world experience of the internal operations of OTR trucks. They are listening to the wrong messengers.

The truck driver retention rate has become so real to many that major news sources continue to react to what they believe to be a real problem caused by drivers. Trade articles are written to find a real solution to the problem of driver retention. An article says:

“Turnover includes both voluntary and involuntary, but the problem is primarily voluntary departure. It is important to know what is causing drivers to change jobs and then determine how trucking can stop this huge waste of effort and money.” . (Source: Business Library – Driver Retention Solutions)

For every driver who quits, there are 50 uninformed rookie drivers ready to take the spot, and for every driver who quits, there are 25 veteran drivers looking for a greener turf. Due to this job change of drivers, the industry has been able to create a crisis that is constantly being verified through the media and that the real problem that has caused the driver retention rate problem is the driver.

It is true that this job change occurs among truckers, however, it is not the drivers who are to blame for the problem, but in fact, the motor carriers create and control the so-called driver shortage and, consequently, the retention of truckers. . rates

The International Journal of Physical Distribution and Logistics Management is a business magazine providing cutting-edge information and business solutions for the industry. Located in the magazine, in Volume 37 Iss: 8, pages 612 – 630, is a report entitled: “Truck Driver Turnover: What Rate Is Good Enough?”

The report, developed by Yoshinori Suzuki, PhD and motor carrier management expert, is a tool motor carriers can use to determine what truck driver shortage/retention rate their business should maintain.

The key information points of the report are:

  • Use: Developing a decision tool that motor carriers can use to determine if they need to reduce their company’s truck driver turnover rate and, if so, by what percentage.

  • Model – Uses statistical and mathematical equations to build a model that will determine the desirable rate needed for that particular carrier.

  • Results: The report shows that it can be used by any motor carrier, regardless of the type of work skip behavior their drivers display.

  • Conditions: The motor carrier may use the determined desirable rate as the rate at which to reduce churn or to decrease churn among its drivers.

  • Importance: The tool will help carriers to correctly identify the “ideal” rate that the carrier wants to achieve. (Source: International Journal of Physical Distribution and Logistics Management)

The industry portrays truck driver shortages and driver retention issues as two separate major issues when, in fact, they are closely related and dependent on each other. one can say, “There is a shortage of truckers because we cannot retain drivers” while another claims, “There is a driver retention problem because there is a shortage of truck drivers.”

It is a kind of Pandora’s Box, used by the industry to push through regulations that will continue to strengthen the grip of power by the major carriers, keep drivers classified as unskilled labor, and keep the poorest drivers.

The industry and media continue to portray the professional CDL driver as a job changer who has created two serious and critical situations for the trucking industry. In reality, it is the industry itself that has measures in place to actively control both driver retention and shortage rates.

Digital Marketing

3 tips for successful affiliate marketing

admin

Affiliate marketing is a great way to make money online and if you are new or soon to be to internet marketing, this is a great place to start. There are millions of products on the market for anyone to promote, so affiliate marketing is definitely a viable and great way to make money online.

There are three main components to being successful as an affiliate:

1. Choose the right niche: The first step is to choose a market. You want to find something with great potential that has money. There are many ways to do this, the easiest is to go to Google and type something like “top niches” or “top trending niches”, this should give you lists of topics. Just type your keywords into Google and see how many results you get, the higher the more competition.

The second step is to do your research on that topic and you want to be sure you have something you can build a campaign on. You can do this by doing a Google search for “top writers in that niche” and see what comes up.

You’ll also want to make sure it’s a topic you can build a campaign around because you don’t want to spend a lot of time and energy on something that’s dying, especially if you can make more money promoting something else. Some people won’t work in a niche with money, you don’t want to fall into this category because you don’t want to go backwards in your career.

2. Choose a product: the product is what you are going to promote. You want to promote great products that help others achieve their dreams. You can see if something is working well by entering your keyword into Google and looking at your results. If they don’t show much competition, then you can get a good idea of ​​how successful they are. Just be careful, there will be a lot of affiliate products coming up and they probably won’t be great, you just have to pick the ones that are good, then you are sure that you are promoting one of the best products out there.

3. PPC – Pay Per Click (PPC) is a marketing technique where you write articles and posts with your keyword in them and if something is in the top 5 for your keyword, you will get traffic because people know your word key when they read your article and then there is a chance that they will click on your link and buy the product.

These three things are the foundation for being successful in affiliate marketing, so make sure you focus on them and you’ll be fine. Remember that it takes work to be a successful affiliate and no one else will do it for you.

Health Fitness

Follow a diet for gallstones

admin

The foods you eat play an important role in your health and well-being. When harmful foods and drinks are consumed in excess, this often results in illnesses that can be fatal or fatal.

In recent decades, more and more people have developed gallstones due to poor diet and bad habits. The cure for gallstones is expensive surgery, but it can be prevented with an effective diet regimen for gallstones.

Gallstones form when minerals build up inside the gallbladder. The gallbladder is an important digestive organ that stores bile from the liver, an alkaline fluid used in digestion.

A diet for gallstones is recommended if you are diagnosed as suffering from garlic gallstones. If you follow the gallstone diet regularly, you will save yourself from expensive gallbladder surgery.

eat a lot of fiber

A diet rich in dietary fiber is one of the best ways to treat or prevent gallstones. Fiber helps your digestive system work efficiently. High-fiber foods include whole-grain breads, whole-grain cereals, bran flakes, muffins, bagels, corn bran cereals, whole-grain pasta, and brown rice.

Eat fruits and vegetables

Fruits and vegetables are rich in water-soluble fiber. Fruits that are good for gallstone sufferers are grapes and fresh grape juice, apples, apricots, strawberries, raspberries, guavas, figs, oranges, lemons, currants, pears, avocados, and dried fruits such as raisins, dates, and prunes.

Vegetables to include in a gallstone diet include broccoli, green beans, kidney beans, lima beans, dry peas, and artichokes. You can also drink fresh vegetable juices like cucumbers and beets, but avoid cabbage.

drink plenty of water

Be sure to drink plenty of water and fluids. Water keeps your digestive system in tip-top shape and helps your kidneys and gallbladder to steadily eliminate waste.

Avoid foods that can cause a gallbladder attack

Some foods are not good for gallbladder sufferers and should be avoided as much as possible. These foods include pork, eggs, poultry, onions, beans (not green beans), nuts, and all kinds of fried and fatty foods. The drinks to avoid are milk, coffee and alcoholic beverages. Also stay away from salty foods and processed foods high in sugar.

A gallstone diet is an inexpensive and healthy way to prevent gallstones and gallbladder disease. Be sure to see your doctor if you suspect you have gallstones. Gallbladder disease can be deadly, but you can avoid it by following a gallstone diet.

Legal Law

Masonic Bible: A man took off his shoe

admin

“Now this was the custom in ancient times in Israel about redeeming and about changing to confirm all things: a man would take his own and give it to his neighbor…” Ruth 4:7 (Masonic Bible )

During the ceremonies of the Entered Apprentice degree, the candidate is instructed in the passage of Scripture from the Masonic Bible mentioned above, which is intended to indicate both the confirmation of a contract and the commitment to comply fully with the terms and conditions. of that contract. In Freemasonry, this symbolism is intended to convey the sanctity of the contract made between the candidate and the Masonic institution when he takes their vows. For the Israelite of Ruth’s day there was nothing more essential than shoes, or sandals, without which men and women were forced to walk on hot sands, dirt, and rocks. Consequently, giving a shoe to another person not only conveyed the importance of commitment, but also the feeling that the person who was given the shoe was just as important as the person who was given it.

This symbolism is repeated throughout Masonry through different lessons, for it is the purpose of the Craft to ensure that each Mason appreciates the importance of his vows and promises. Entire charities depend on the fulfillment of such commitments. Shriners-operated hospitals would disappear if Masons suddenly decided that serving the homeless is not important. Nursing homes would no longer receive funding if groups of Masons turned their backs on the needs of others. Members of individual Masonic lodges would never experience random acts of kindness from their brethren if Masons concluded that self-interest is more important than helping others. It is the agreement or covenant made by each Mason that guarantees that the world will experience the fruits of Masonic labor. However, as with other Masonic symbolism, there are also other esoteric lessons to be learned from the Masonic Biblical scriptures found in the Book of Ruth.

“Now this was the ancient custom in Israel concerning redemption and the change to confirm all things: a man plucked up

his and gave it to his neighbor…”

Ruth 4:7

“Taking off your shoe and giving it to another” also symbolizes redemption and change and is equally important to Freemasons. For those who regularly attend church services and watch the collection plate being passed around, it’s intriguing to note how often people throw in some change, a dollar or two, or perhaps nothing at all. For some, simply having attended the service is enough, as it represents the sacrifice of time, if nothing else. Similarly, the Mason who works for a living has probably watched his co-workers express support for those in need during the holidays, but how often does he observe actual acts of charity: giving time, food, shelter, and compassion? ? It is within this realm that redemption and change apply.

Theologians frequently remind their audiences of man’s original fall from God’s grace, commonly known in those circles as “original sin.” The villain here is temptation, about which much has been written before. Temptation represents the transition from obedience to disobedience. The man who has yielded to the temptations that have invaded his life is truly in need of redemption and change to regain his original obedient nature. The Holy Scriptures offer us the allegory of Adam and Eve in the Garden of Eden to convey to us the importance of all men striving to dominate their passions and keep them within due limits towards all humanity.

In the Masonic Bible book of Genesis, Eve heard the voice of the serpent, saw that the tree of knowledge was good for food, and took and ate what she wanted in complete contravention of God’s command. There is no greater symbolism of disobedience recorded anywhere in our Holy Scriptures, or anywhere else in any other traditional story. The voice of the serpent represents the living being whose intelligence is more advanced and whose consciousness is turned towards the horizontal or material plane rather than the vertical or spiritual plane. The intelligence of both Adam and Eve before the Fall was completely vertical. Their eyes had not been opened to their own “nakedness” and they were aware of everything vertical, or of God. After the Fall, the understanding of his condition radically changed. Suddenly aware of their nakedness, the fig leaves adjusted to cover the most private parts of the human body and their entire consciousness was consumed with things related to the material plane.

Here, the serpent symbolizes the principle of power apart from God. The rest of the stories and stories expounded in the Holy Scriptures relate to man’s journey back to the living God. Temples are erected in his name; the prophets exhort the generations to obey their laws; wars are fought for his sake; men suffer in obedience to his word; and, man looks for a messiah to deliver salvation. Along the way, man also discovers that the true principle of obedience is unreserved devotion to the one voice from on high. It is precisely at this juncture that Freemasonry generally steps aside to allow Masons and their families to seek their own path to salvation, so that all men at all times and in all places may know that Freemasonry is not a religion. .

Those who follow the Jewish faith find their way to redemption and change through the Law of Moses, including the Ten Commandments. Buddhists walk the path of inner serenity, as do Hindus, each seeking the inner peace that enlightens the soul. Christians decide to accept the divinity of Jesus Christ. Muslims try to align themselves with the teachings of Muhammad and his descendants to ensure a proper place in the world of obedience to God. But what about the Mason who has not selected a formal religion to follow? If he does not adhere to a particular dogma, is his journey from the Fall to obedience destined to fail? Freemasonry tells such a man that he will not fail if he dedicates himself unreservedly to the only voice from above: the voice of the Supreme Architect of the Universe.

All of human existence is about choices: the choice to live in the light, as well as the choice to live in the dark. Mankind is offered a plethora of religious doctrine to choose from and is surrounded by the philosophies developed by the greatest minds that have ever lived. History, literature and science also weigh and put before each and every one a literal banquet of options. He who has chosen well has chosen the path that leads directly back to obedience. Man is both redeemed, or claimed by the Creator, and changed when he decides to ask God to reveal his will to him; he seeks to understand how to apply that will to his own life; and he knocks at the door of the Great Architect with faith that the door will open. The door is never forced open. It is expected to open by the will of God.

It is relatively easy to discern the obedient person. He avoids anger and replaces it with kind words to his fellow man. He acknowledges his own faults, apologizes for his slights to others, and resolves to do better next time. He freely gives of his precious time to serve, comfort, and be compassionate to others. He visits widows, orphans, and the elderly. He avoids disputes and builds harmony. He understands different points of view and keeps pride in check. And, he regularly kneels in humble praise and supplication to the Almighty Father of the Universe—the only living God. Simply put, he is a Mason.

Lifestyle Fashion

Daytime Makeover Tutorial for Naturally Flawless Skin and Eyes

admin

To achieve a clean, fresh look, you’ll want to apply as little makeup as possible. The point is to look naturally flawless. You want people to think that you’re not wearing makeup and that you’re this handsome all the time. For this you will only want to put on as much makeup as possible to hide imperfections and enhance eyes and lips.

So what does this mean? Well, you’ll want to cover blemishes and use your foundation and concealer only on blemishes, reddish areas, dark circles under the eyes, and any other areas where there is bruising or discoloration. By evening out your skin tone, you’ve already done 80% of the work. Again, you only want to cover uneven areas, don’t apply your foundation like a mask, especially if it’s a day makeup. Trust me, even if you don’t think it’s all that noticeable, everyone will know you’ve layered the frosting.

Next, you’ll want to choose a blush shade that closely matches your natural blush. Apply just a light layer of blush to the apples of your cheeks. The easiest way to avoid applying too much is to use a large fan brush and a powder-based blush.

You will then want to curl your lashes and draw a thin line of eyeliner. You only want to use enough eyeliner to give your eyes some contrast and define their shape. Don’t use a Kohl pencil and try to draw a smoky eye. If you have short or thin lashes, you’ll want to use a light coat of lengthening mascara or grow your lashes out with an eyelash growth conditioner. Next, brush your brows and apply enough brow powder or use your brow pencil to fill in any uneven patchy areas.

Finally you’ll want to finish off your natural look with a light coat of lipstick or lip gloss. Use a color that is just one shade darker than your natural color. Once again, we want to define and enhance its natural features. This will give you some color, make you look more awake, and cover up pale lips without making them look too overdone. If you wear a matte lipstick, you can make your lips look less powdery with just a touch of gloss on the cupid’s bow of your upper lips and the center of your lower lip.

These simple makeup tips are a great way to achieve a fresh and easy look for work or just going to the grocery store. These are simple things that take less than 5 minutes and even the most clumsy and artistically challenged among us can learn how to apply makeup this way. You’ll have a natural, youthful, dewy, fresh face in just minutes without feeling like you’re wearing a thick powder mask.