What Hot Tub Chemicals Are Best For Sensitive Skin?
What Hot Tub Chemicals
Chlorine is the most common hot tub chemical, but there are other alternatives. Bromine is less irritating and lasts longer than chlorine, so you may want to consider using it instead of chlorine. But be aware that bromine can stick to your skin and swimsuit, so you must rinse thoroughly after your hot tub session. You can also use oxygen tablets or liquid in combination with the chlorine, which kills bacteria and germs in the water.
Another alternative to hot tub chemicals for sensitive skin is to use an organic solution. Organic hot tub solutions contain a blend of ingredients that are not harmful to the environment and are beneficial for sensitive skin. For example, biguanides contain antimicrobial properties and can sanitize water without the use of chlorine or bromine.
If you have sensitive skin, you should check the chlorine levels of the water in your hot tub before soaking. You can also use non-chlorine chemicals like baking soda. These products are gentler on the skin and are safe for 20 minutes. It’s also wise to test the water after each use.
What Hot Tub Chemicals Are Best For Sensitive Skin?
When choosing hot tub chemicals, keep in mind that the amount of each type of chemical will vary, depending on your body chemistry, the number of people in your hot tub, and what materials you have added to the water. Adding plant material to your tub may help balance the pH levels. It will also eliminate bacteria and algae in the water. If you choose to add plant material to your hot tub, don’t forget to consult with a specialist.
Another option is using an earth-friendly spa stick. These products will clean the water and release minerals slowly, leaving your skin feeling fresh and clean. These products are gentler on the skin than traditional chlorine, which can dry out sensitive skin and irritate the skin. If you’re prone to irritation, an organic spa stick may be right for you.
If you’re concerned about the toxins in your water, you can use baking soda to treat the water. It will also help to remove bad smells. You can use four tablespoons of baking soda in a 400-gallon hot tub. Leave the tub running for at least two to four hours while using the baking soda. Afterward, you can check the pH level of the water. If the pH level is too low, the treatment should be discontinued. A pH level of 7.8 or higher is acceptable.
Another option is to add a Total Alkalinity Increaser. Adding this chemical to your water will correct any alkalinity level problems. Make sure to add a small amount at a time, so the water has a chance to circulate properly before adding more chemicals.