Tours Travel

Rathole In Omaha (Short Story)

admin

((The Omaha Gambit) (November 1967))

“Come on,” said Jerry Hino, it was morning and we needed to get an apartment, there was a light layer of snow on the ground, it was November 1967 and this was my second big trip. The anxiety and dilemma of the night driving through Milwaukee had passed, we had driven from Minnesota, to Milwaukee, to Madison, Wisconsin, and here we were in Omaha, Nebraska. In Milwaukee we almost got shot. Anyway, we had left it from Milwaukee to Omaha.

I was a bit disappointed in the city; It didn’t look like much, I saw Dodge Street right away, and we scrambled up and down it looking for an apartment. Jerry was running away from his girlfriend Nancy, and I was on my own adventure, second to be exact.

I looked around at the clustered cluster of rough buildings, duplexes, and corner grocery stores, dotted around what I called Upper Dodge Street, and on a branch here and there (Dodge is the main branch of the tree).

On my adventure in Seattle, I ended up with Jeff’s wife coming over, and here again I have a friend who had left a lovesick woman, on adventures, and hoped she wouldn’t appear on the scene, and until now. well. Anyway, we found an apartment mousetrap just off Dodge Street, and the duplex was right next to each other, so our neighbors were closer than white on rice. I didn’t really have a plan ‘B’ here if things didn’t work out, I was just hoping they would between Jerry and me, and apparently they did. He, like me, liked our way of drinking, and maybe he was a little overweight, he was about my height, he was five feet tall, he talked and weighed two hundred and forty pounds, he was joking, he was very overweight.

The duplex was gray, and I guess it was built in the 80’s, and it was like I said, 1967, that is, 1880. We paid two weeks rent, that was all we could afford at the moment, it cost us $ 65 dollars, And that was a highway robbery if you ask me, I mean it was a crude, lean lodge. Surely it wasn’t unknown to me at the time, during those years anyway.

Jerry seemed to speak for both of us, and since he was the oldest, I didn’t make fun of that, he often listened carefully during those drinking days, we had our stories to tell, we told them, and we laughed for the middle of the night. We must have gotten drunk every night we were in Omaha. And in the middle I looked for work, Jerry no, he slept all day, while I watched; I think that was one of the reasons he and Nancy got into a fight; I could be wrong. Anyway, I went to the Omaha State Employment Office and they asked me where I came from and why I was there trying to take jobs from the good people of Omaha, who needed a job worse than me. that, “I did not answer that I was treading on forbidden ground”, he did not like my comments and told me to go back where I came from and to stop taking jobs from other good people. I know what I wanted to say, but I just shook my head and left the vulture with his cornfields.

I found a job across the bridge in Iowa, I felt like good people there, working for Howard Johnson, as a dishwasher. It paid well, and the work wasn’t difficult, and I got a big discount on food, and they usually gave me an extra portion, and I took it to Jerry, I think they thought it would be my afternoon. Dinner at night, but for me dinner was beer, not food.

Well, a few weeks went by, and Jerry sent his mother a letter, telling her how he was, not knowing why he did it at first, I mean, I never did, I didn’t feel the need to, we had only been a few weeks, not months or years. Anyway, our address was on it, this now took the secret away from us as to where we were and of course Nancy got hold of the address, unsurprisingly. Now it was inevitable, one day he would show up on our doorstep, but of course I didn’t know all this at the time. But it wasn’t long, and yes, she was there one night when I got back from work, and again I was puzzled, but not as surprised as when Jeff’s wife showed up out of nowhere wanting to go with us. to Seattle. At that moment I thought: what happens to these guys? Don’t they have any stemma that stay away from their little women, who they run from, who they can’t live with, or who they can’t deal with? I also had old girlfriends and I was glad to get away from them, and the further the better, and the longer the better. In fact, I never went back to one that I left, nor to anyone who left me, why, once the link is broken, it breaks, as my mother used to say: get off the bus and look for another one.

Maybe I was his shadow for the next two weeks; I think we spent a month to six weeks at that Rathole. I went alone, I visited the museum, which had many Indian artifacts, and we all got drunk at night, as always.

But to make this story more interesting and build the plot a little bit, though not much, because it’s actually the end of the story, we just went back to Minnesota, I lived with them for six weeks, they asked me to leave later. That, since they had kids, and I was sleeping on the couch, and you know, that goes out of style. Anyway, I remember the Jewish store, down the block in our Omaha neighborhood. I spent some time down there, talking to the old red-haired Jew. Gold teeth, not bad for fifty, had pretty pretty curves, and I, of course, matured at nineteen. His house was also a Rathole, but I suppose it suited the neighborhood well. The store had high ceilings, exposed wooden beams, and the place was damp, messy and everything looked old, rusty tin items. Perhaps she was a drug dealer and this was her facade, but she couldn’t have imagined it at the time. I liked it, and it allowed me to come and go and not buy anything and hang around.

05-17-2008

Arts Entertainments

Cocker Spaniel Teething – How To Help Your Puppy During Teething

admin

Your Cocker Spaniel is teething and chewing fuss. No matter what it is, furniture, shoes, books, fingers, lamp cords, socks, remote controls; Anything within reach works for the puppy. How can you stop this behavior?

To tell the truth, the cocker spaniel does not know any better and only seeks to remedy a problem in his own way. The problem is the discomfort during teething. In this article, we’ll cover a variety of solutions to stop chewing pain and fuss by channeling the puppy’s behavior in a positive direction with pain relief solutions. What not to do is just as important as knowing what to do.

First, we must understand that chewing on the Cocker Spaniel’s teething is not bad behavior, but rather a means for your puppy to deal with discomfort. Teething is a natural process for all puppies. For starters, when your dog feels the urge to chew, it is best to provide aids to help him. Rubber toys, frozen towels, and chew rings are a good quick fix. However, we will cover more solutions in greater detail in just a minute. Let’s get an idea of ​​the Cocker Spaniel’s teething cycle so we know what we’re dealing with here.

The teething cycle

1) Between 2 and 6 weeks, milk, also known as deciduous teeth, will begin to surface. These are the little needle-sharp teeth that your puppy will first expose through his gums; there are usually about 28 deciduous teeth.

2) Deciduous teeth can last between 4 months and a year. During this time, the permanent teeth will emerge gradually replacing the temporary teeth becoming the dog’s permanent teeth. Typically 42 permanent teeth by the time it is done. The puppy may experience some minor discomfort for up to a year after the permanent teeth have been exposed.

3) Most Cocker Spaniels will experience the most discomfort between 2 and 7 months during the teething process.

4) You can expect permanent incisors between 2 and 5 months (used for nibbling), fangs between 2 and 5 months (used for grasping), premolars between 4 and 6 months (used for tearing), canines and molars between 5 and 5 months. 7 months (used for shredding).

5) Malnourished puppies will have slower teeth, large breeds will bite earlier than smaller breeds. Of course, race, gender, and date of birth all influence the teething process. But, in general, the cycle is quite closed for everyone.

What makes the puppy chew?

During the teething period, the dog’s gums itch and are very sensitive. The Cocker will try to alleviate the discomfort by chewing on anything that his mouth can hold onto. This has a calming effect and relieves pressure on the gums.

Teething Solutions: Helping Your Cocker Spaniel Through the Process

Here are some effective solutions. It is best to use several during the teething process to prevent your puppy from getting bored.

1) Ice Cubes: Rub the ice cubes on the puppy’s gums. The cold will help number the area. Your dog may like to lick and try to chew on them too.

2) Popsicle – Give the dog a fruity popsicle as an occasional treat. Remove the stick.

3) Cold towels: Take some old towels, soak them in water, and put them in the freezer long enough to cool them down. The dog will like to chew them and it will help reduce inflammation of the gums.

4) Cold rope: dip a rope and partially freeze it. You want the rope to be big enough that the dog won’t swallow it.

5) Hard Cold Chew Toys: They are also good for soothing the gums. Place chew toys in the freezer to cool before giving them to the puppy.

6) Bone marrow: boil in chicken or beef broth for fifteen minutes. The dog will love these.

7) Aloe Vera: Freeze to a slush consistency and then rub on the gums. When rubbing the gums, get behind the dog and reach forward to support the dog’s chin and then rub the Aloe Vera on the gums. A good massage of the upper and lower gums also helps.

8) PetAlive Puppy Tooth Granules – Very effective in relieving acute symptoms, pain, and inflammation of the gums. It will also reduce the need to chew.

What not to do during the Cocker Spaniel teething

1) Don’t play aggressive games with your dog like tug of war. It is best not to participate in any activities that your puppy may associate with aggression and dominance.

2) Do not allow your Cocker to chew on old shoes or household items that you no longer want. The dog does not recognize the difference and will assume that it must be okay to chew on items of the same type that it can find.

3) Do not yell or yell at your dog if he must destroy or chew non-prohibited items. It’s best to catch them in action and redirect your attention to one of the remedies listed above. This way, you can work to break down the unwanted behavior.

4) Don’t let the dog game bite you. It may seem cute at first, but this behavior will only lead to a bigger problem down the road.

5) Do not allow a teething puppy to play with young children unsupervised.

Simple solutions will help control chewing. You can expect the entire teething process to take 7-10 months. Making sure your pup is getting the correct nutrients and excise duties will help promote the process. With proper care and supervision, you can monitor and help your Cocker Spaniel out of teething with ease.

Technology

Private Pilot Flight Training Reflections

admin

It was on a mild, flawlessly blue day, September 29, 1995 that I walked into the modern State University of New York-College of Technology at the Farmingdale Aviation Center on Long Island Route 110, experiencing a degree of unease, which I began my Private Pilot Flight Training Program. The fact that it was technically a required “class” for my Associate of Applied Science degree in Aerospace Technology, shared with others I knew from the main campus facilities some two miles away, significantly extended the scope of experiential education further. beyond what might have been considered a “routine”. . “The fact that he had already had a decade-and-a-half international airline career at JFK International Airport certainly made it a constant theme. Yet this time he was about to take the pilot’s seat.

Received by my Certified Flight Instructor (CFI), I was told to take the Apocalypse Pilot Operation Manual (POH) from the Aviation Center and drop it into the respective aircraft on the ramp. My initial and introductory lesson would be in a Cessna C-172 Skyhawk, registered N73334, a four-seat, high-wing general aviation aircraft powered by a 160-hp twin-blade Avco Lycoming O-320-H2AD single piston engine. . Its design and performance parameters were many: its maximum payload was 910 pounds; its maximum takeoff weight was 2,300 pounds; its fuel capacity was 43 gallons; its maximum speed was 125 knots; its rate of ascent to sea level was 770 feet per minute; and its service ceiling was 14,200 feet.

With checklist in hand, I did a clockwise pre-flight inspection from propeller to flight surfaces and fuel dump to check for clarity, before taking the left seat and holding onto it. the seat belt and shoulders.

“Prop, sure!” I screamed to alert anyone in his vicinity of his impending start, causing the engine to grunt and get stuck in an elevator bathroom life generating a jet of water. The plane felt alive and I controlled it.

When requesting taxi clearance from the Aviation Center on the Republic Airport ground frequency, I released the foot brakes without pushing the power lever further in and the rotating propeller naturally put the aircraft in motion along the ramp at a brisk pace. .

You had to resist the temptation to maneuver with the yoke: it only deflected the ailerons for roll in flight and did nothing on the ground. The movements of the rudder pedal ensured the direction of the nose wheel.

Pushing myself on the acceleration pad near the threshold of Runway 1, I performed a full flight check from brakes to magnets, flight surface freedom of movement, and current altimeter barometric pressure setting, and then switched at the frequency of the Torre de la República, gradually advancing to the runway and receiving clearance for take-off.

Peak power from the engine deafened the cockpit, sent a rush of air over its aerodynamic surfaces and propelled the high-wing aircraft to acceleration. The almost immeasurable pressures of the rudder pedal allowed me to keep the nose wheel on the center line, while the wheel itself, beginning to jump off the ground, was the Cessna’s signal that it had gained enough speed to surrender to the flight.

A gentle pull on the yoke and a depression of the right rudder pedal to counteract the propeller torque, released her from her gravity restraints several thousand feet before the end of the runway, while “riding the ball”, trying to keep her centered. .

Ignoring the procedure, I veered to the right, so my flight instructor advised, “Hold the runway heading until you clear it.”

The ground receded and the blue purity of the sky became the new dimension of flight.

Climbing to 2,200 feet and reducing power to grade, I crossed Long Island to Northport Stacks, while my instructor demonstrated the unevenness and descents. The hour-long introductory flight passed quickly.

When I approached the Republic airport again, I radioed: “Republic Tower, this is the Cessna 73334, coming in to land.”

Authorization to “continue” was given.

Unable, in my rookie state, to actually execute the landing, however, I was able to fly a pattern to the right, which consisted of the wind direction, base, and end legs, the last of which required extensions. progressive flaps of the trailing edge, which could only be counteracted by pushing the yoke to avoid the tendency to raise the nose. A reduced power round and flash refined the aircraft at its immediate takeoff rotation angle and stripped it of its airspeed, allowing it to gently touch its main wheels. Brake-assisted deceleration and a drift to the taxiway preceded a frequency change to Republic Ground, which granted clearance to return to the Aviation Center while I “cleaned” the aircraft by retracting its flaps. A pull on the power lever deprived the engine of its fuel and all vibrations, noises and drafts ceased.

An information session and a log book entry were held inside.

The following week’s lesson involved operating the smaller two-seat Cessna 152, registered N67856, with a takeoff from the reciprocal of Runaway 1, in this case, the 19, and a cruise to the South Long Island practice area over Jones Beach, connecting, set of erectors resembling Captree Bridge. The return required radio communication from “Republic Tower, this is Cessna 67856 over Captree, incoming for landing.”

The five-session, 5.7-hour flight training course, called “Introduction to Flight I” and which ran from September 29 to October 27, also involved aircraft N757AA, another C-152, and the plan of studies included the four fundamentals of flight, minimum controllable. airspeed, 30 degree slopes, stalls, descents and landings on runway 14.

The next six-flight, six-hour “Introduction to Flight II” course, which ran from February 27 to April 19, 1996, included all Cessna 172 aircraft, although two N734HD and N1517E have not yet been registered. had flown. They also introduced me to a new flight instructor.

Although the standard curriculum included hands-on maneuvers like slow-flying traffic pattern and coordinated flight, a man-machine fusion in continuously changing weather conditions created some challenging moments.

A half-hour sector at Marah 15 on aircraft N734HD, for example, caused a quick return after takeoff in the rain and nothing more than a traffic pattern loop due to conditions threatening the visual flight rule (VFR). .

The coordinated flight on April 12 in aircraft N1517E over the northern practice area took place amid thick overcast and 35-knot winds blowing from the right side forward, propping up the Skyhawk and making it difficult to maintain control.

And the following week’s departure, with the N734HD on April 19, involved the roar of the engine as it revved to a setting above 2,200 rpm, leaving the flight instructor to take control and immediately return to the LA airport. Republic from the southern practice area, all while at a slight angle of climb. An inspection of the engine was clearly in order afterwards.

The “Primary Flight I” course in the fall semester of 1996, with the same flight instructor and the Cessna 172 with which I had already become familiar, covered eight sectors and 8.7 hours during the period of September 19 to September 5. December 1996. He included some of his own surprises and challenging situations.

On two occasions, on September 19 and November 1, both with the N734HD aircraft, I flew 15.5 nautical miles in sectors reminiscent of the airline from Farmingdale’s Republic Airport to Islip’s Long Island MacArthur and landed before returning. During the first, I made crosswind takeoffs and landings, the last with only ten degrees of flap, and learned about radio communications in Class C airspace. Returning from the second, I made a left turn downwind. below the clouds that were 1,600 feet, experiencing moderate turbulence, a 50 degree crosswind at 25 knots with gusts of 32, wind shear at the end, the incessant sound of the stall warning horn, the falling continuous left wing to ground and insufficient rudder travel, causing my flight instructor to desperately take over and correct each altered lateral axis until enough speed had been bled to fire and snatch runway 32 from Republic with his main wheels.

The remainder of the fall curriculum involved the more “mundane” airspeed maneuvers and configuration changes, 45-degree bank, S-turns, and turns around a point.

The spring 1997 continuation of “Primary Flight I”, spanning the four-month period from January 27 to May 12, included eight sectors and 7.7 hours, and the reintroduction of my original flight instructor. The first three flights were on the N734HD aircraft, and the remaining five on the N1517E, all obviously Cessna 172. His lessons included climb and descent turns, tracking, air traffic control procedures, straight and level flight, airport entrances , an inadvertent dive into cloud-causing instrument meteorological conditions (IMC) and a short, rapid descent from 1,200 feet. to runway 14 at Republic airport.

Along with a private rental of a C-172 Skyhawk from Republic’s Nassau Flyers Fixed Base Operator (FBO) on January 30, 1996 (registered as N5700E) for a one-hour Long Island South Short cruise, during which one of my airline colleagues were my first “passenger”, my flight training program ended with 32 sectors and 29 hours in my diary.

Home Kitchen

How to Install Light Rail Cabinet Trim

admin

So you want to know how to install your own kitchen under cabinet light rail trim. Do not attempt installation unless you have some basic carpentry skills. You will also need some hand and power tools. Do not attempt this phase of your kitchen cabinet installation without sufficient time. Miter box is NOT allowed to be cut by hand! You must achieve the highest quality installation possible.

Tools and Materials Needed:

  • Chop saw
  • Electric drill
  • Three clamps (I prefer Jorgensen clamps)
  • Screws of correct length
  • Countersink bit
  • 1/16 “pilot hole bit
  • 3/16 “bit
  • Hand screwdriver
  • Yellow carpenter’s glue
  • Matching wood putty

One of the most popular questions people ask is; “Should the trim be installed flush or flush with the face of the closet?” I always recess the light rail no less than one eight (1/8 “) inch. This looks better than trying to place it perfectly flush with the front frame. Note that the light rail must be flush with the end. of the cabinet next to the place where a space-saving microwave is installed.

Measure roughly the length of each piece of trim you will need and add four inches to each piece. Hopefully you’ve thought about asking for a lot more in case you make a mistake. First, cut all the pieces you need larger.

Now cut a few “small” practice miter pieces at forty-five degrees. These should be used to verify that the corners of the cabinets are at true ninety degree angles.

Now when you start cutting the trim pieces for the light rail, just cut the angles one piece at a time. The key to installing the trim correctly is working with the precise details one piece at a time and one miter joint at a time.

Before making cuts, drill holes from the inside of the cabinet down with the 3/16 “bit. Then, countersink the holes from the inside of the cabinets. These are the holes that will secure the trim. to cabinets.

The finished trim pieces will be attached to the cabinets with ¾ “x 1” X 8-1 / 2 “blocks. The blocks are attached to the short return trim pieces and then screwed to the cabinet from below. Make it this way This way is because you cannot hold them from inside the closet.

Kitchen Cabinet Light Rail Installation:

  1. Decide which part is best to install first (consider working from highest to lowest)
  2. Make your cuts
  4. Apply yellow glue sparingly to the miter joints.
  5. Hold the part in place with the Jorgensen clamps
  6. Drill the light rail through the countersunk holes with the 1/16 “bit.
  7. Secure the trim in place with screws
  8. Clean access glue immediately with a damp cloth.
  9. Repeat these steps for each piece of light rail

The three-sixteenth-inch hole you drilled should be larger than the screws you are installing the trim with. If you need to adjust the trim a little, loosen the screws with a manual screwdriver. Align the light rail accordingly and then secure it firmly in the perfect position.

If you start to get frustrated, take a break. This is tedious work. The joints in the kitchen cabinet light track should be as tight as possible.

The final step of the installation process is to fill the miter joints with the appropriate wood putty. Wipe off any excess caulk with a dry cloth.

Auto

Smart Fortwo Mini-Cars, the shape of things to come?

admin

When the Mercedes Smart ForTwo microcar begins arriving in the United States in January 2008, a new sub-subcompact segment will be created.

This is a specialized niche market vehicle for urban situations where parking is tight and expensive.

People who want to make a green statement will find that the 8-foot 8-inch Smart ForTwo receives more attention than increasingly common hybrids. This car is more than a meter shorter than the Mini-Cooper – those who call it a “golf cart” don’t stray very far.

Do you want to attract attention? Just back your Smart car straight onto the curb like a motorcycle instead of parallel parking. Two can fit in an ordinary parking space.

With a surprisingly spacious interior (sleeps 2), Smart cars are expected to appeal to city dwellers in San Francisco, Manhattan, and other congested cities along both coasts.

Most of the smaller cars sold in the US have been cheap, most are made in Korea.

Mini Cooper and Toyota Scion have shown that there is a growing market for quality small cars.

And ForTwo is diminutive. Weighing in at 1,800 pounds and powered by a 70-hp rear-mounted three-cylinder engine, the Smarts hit a top speed of 90 mph after considerable persuasion.

The 2008 EPA fuel economy ratings are 33 city / 40 highway.

Performance is not impressive: 0-60 mph in 12.8 seconds.

Penske Automotive Group, the second largest dealer chain, has contracted to distribute the Smart and has contracted 73 dealers nationwide.

Europeans have been driving Smarts for more than ten years, during which time around 800,000 have been sold in 36 countries.

The version configured for export to America will be made in France.

Penske intends to sell a minimum of 30,000 ForTwos in 2008.

While this seems ambitious with a well-established Mini only making around 38K, thirty thousand potential buyers have already made a $ 99 refundable deposit.

Mercedes has designed this skate to overcome the safety obstacles that all mini-cars face.

Crash tests, with videos available on the web, show that the 4-2 is safer than other small cars, especially those made in China.

In extensive crash tests, the steel roll cage that surrounds the passenger compartment has resisted deformation.

The economy car has standard safety features normally found in luxury vehicles; four airbags, antilock brakes, electronic stability control and a collapsed steering column.

The US government will test the Smart car after it hits the market. The builders predict it will receive four out of five stars in the American crash tests.

European models recently received four out of five stars in the Euro New Car Assessment Program (NCAP) tests.

The Smart comes in three affordable trim levels: the entry-level Pure, which at $ 11,590 lacks air conditioning and radio; Passion $ 13,590; and Passion Convertible Convertible $ 16,590.

And well, it’s modern. Smart already has the environmental brand image that competitors are trying to buy with advertising.

Tired of the color? Simply unscrew the plastic body panels and replace with any shade.

Will the market hold Smart, which has never been profitable, after the new one wears off?

Yes, it is modern, fuel efficient and cost effective. But the “Smart” may not be the automotive form of the future.

Designers made concessions to meet safety standards: occupants ride high, at eye level with other traffic.

The upright stance distributes the crash energy under the car. This creates a large, square front area that hurts fuel efficiency.

Smart’s very high drag coefficient of 0.38 causes fuel economy to decrease in proportion to speed more quickly than other designs.

While the ForTwo could be a start to a spatially efficient America, gas mileage isn’t significantly above Honda and Toyota 4-seat cars.

With the 505-horsepower 2008 Chevy Corvette ripping through the asphalt and powering 29 mpg on the highway, 40 mpg for a microcar hardly qualifies as progress.

In 1966 I bought a 1958 Morris Minor 1000 to drive to high school. It was initially designed in 1948. The Morris was modern, cheap, and fuel efficient.

That 60-year-old design also got 40 miles on a gallon of gas.

Digital Marketing

Wachter Organic Seafood – Full Review of Wachter’s Business

admin

Wachter Review – The Good …

Wachter’s Organic Sea Products is a long established network marketing company. It was founded in 1932 by Dr. Joseph Wachter, who realized the potential, both from a health and economic standpoint, to bring marine plant nutrition to market.

The company sells a wide range of products based on the benefits of sea vegetables: for humans, pets, home and garden. Products for human consumption include nutritional supplements, personal care products, and aromatherapy, and provide minerals, vitamin D, cell growth regulators, and natural enzymes. Garden products are designed to improve the soil and help plants grow, while household products are primarily for cleaning.

Since Wachter’s Organic Sea Products is a network marketing opportunity, it means that the products are only available through Independent Distributors, who build their own business based on the sales and bonuses they can achieve by sharing the opportunity with others.

The bad …

The problem Wachter Distributors have is that marketing techniques in the MLM industry haven’t really advanced in 50 years. People are still encouraged to sell in and around their neighborhood, to friends, family, and business associates. They are encouraged to hand out flyers, cold knock on people’s doors, hold meetings and presentations, give away free samples, and pay to advertise in the local newspaper, for example.

When Wachter’s was first founded 70 years ago, these methods worked well. The society was based on the community and people bought locally. Shopping malls did not exist as we know them today, and the Internet had never been heard of. If you could sell to people in your local area, you could earn a decent salary.

The ugly truth …

Today, people go online to do all their shopping or to get it all in one visit to the mall. They don’t have time to listen to sales pitches or read brochures, and they’re probably sick of network marketers knocking on their door trying to sell them something they don’t want.

How to make money from organic Wachter seafood

If you really want to be successful with organic Wachter seafood, you need to adapt to the times and start doing business online. Every day, people go online to shop and use their search engines to find what they need. Imagine how many customers you could find if your name appeared at the top of every search for gardening products, for example, natural household cleaners or nutritional supplements. This is what all the major network marketers have realized these days, and they are generating hundreds of leads online every week and adding 2-3 to their business every DAY.

The techniques are simple to learn and easy to apply. Anyone can do it, all you need to do is take the time to learn the required skills.

For more information on how internet marketing could blow up your Wachter organic seafood business, check out Wachter Online Success.

Relationship

How to develop excellent math students

admin

There was a time when the United States of America had some of the highest math scores in the world for students in grades K through 12. Much has changed since those days, and to help children get back on track. To be good math students, parents must play an important role. Parents can help develop many of the foundational skills necessary for children to be successful in math when they attend school. Parents can do things that will support schools, and hopefully schools will do the rest.

To develop a student with good math skills, parents must play a key role in the learning process. In addition to parents, teachers and other family members are very important to a child’s mathematical development. Elementary teachers and parents play the most important role in a child’s mathematical development, especially from kindergarten through fourth grade. Time spent in school learning math or not learning math can never be replaced. Parents should ensure that the elementary math teacher is knowledgeable and a good teacher. Anything less could cause children to suffer tremendous loss. The teacher that parents should be trusted to teach their children math is a person who will challenge their children regardless of their age. In addition to the challenges, the teacher should encourage the children to make an effort. Children need to know that their teacher cares about them and is not just trying to give them a lot of work. This teacher should believe in giving homework every night. Homework reinforces what was taught and learned in class and gives parents and the teacher an opportunity to see if the child understands that information.

I have observed teachers who really challenge their students to achieve higher order thinking. These teachers take their students from second grade and teach them how to add, subtract, multiply, and divide using only their bran. We call this Mental Math. When I observed a second grade class that had their students mentally answering math questions, I put my own son in that class. Soon after enrolling, he, too, learned to do mental math. From that moment on, math was my son’s best subject. Teachers can really make a difference and parents can help make the change.

The role of parents in the mathematical development of their children is very important and should start as early as possible. Teaching young children to mentally count, add, and subtract numbers without pencil and paper can stimulate the brain to think mathematically. Parents can start the process by teaching children to count from one to one hundred. Teaching children to mentally solve math problems should also be part of this process. They can start by asking simple math questions and move on to more difficult questions as the child grows. Parents should continually ask children questions about math and give positive feedback when they answer. Children love positive feedback and that encourages continued growth.

In addition to mental math activities, children should receive grade level math workbooks to strengthen their math skills. Parents should keep these books and other content-themed books at home for additional homework and practice. These can be purchased at bookstores, teacher supply stores, and multi-purpose department stores where school or office supplies are sold. As children become more confident in their math abilities, give them worksheets one grade level above their current grade. Help them if necessary, but when students are successful in higher-level workbooks; your confidence will really improve. The seed will be planted early and parents will be able to watch it grow.

A parent should know what level of math and whatever other subject, for that matter, their child is performing in each school year. When children enter kindergarten and the school recommends that children know the alphabet and know how to count to twenty or any number, it is the parents’ responsibility to ensure that the child is prepared before enrolling in school. Also, when the child is in the second or third grade and their child cannot add simple two-digit numbers, it is up to the parents to ensure that their child receives the extra help necessary to be successful. Parents cannot wait at school every time their child has an academic deficiency. Part of being a good parent is making sure your child performs at the correct grade level throughout their academic career.

Another strategy is to allow your child to spend some time at a computer playing math games. The computer can be a wonderful resource that supports math and other subject area skills. There is software available that will measure a child’s level of math ability. Some of the software is developed in game format. Children will think they are playing, but they are actually learning math. Technology can be great, but I must warn parents not to allow children to spend a lot of time unsupervised on the computer.

Another recommendation for parents is not to allow children to use calculators at an early age. Children first need to develop their brains to be able to do math on their own. Consistent use of calculators at an early age can hinder children’s mathematical growth. If children develop math skills by mentally thinking about the answer to simple problems, they will be better prepared for everyday life, like grocery shopping, balancing a checkbook, to name a few. For example, all children should learn the multiplication tables for third grade. They should be able to repeat them, verbally, without using a calculator. Children in elementary school who depend on the calculator for answers are creating math deficiencies, which could have a negative impact on their math development.

In addition to good teachers and involved parents, children should participate in extracurricular activities that support math. In the state of Michigan, students can join a club at their school that plays a game called Academic Games. This form of play is challenging for children. It helps them develop their academic and math skills. Children can start playing these games as early as second grade. This form of play will teach children to play the game of equations, a form of algebra, at the age of seven. These skills are called higher order thinking skills. Children also compete at the local, state and national levels. The experience is invaluable. There are also other math games and clubs that kids can join that will help build skills and are fun. Parents should contact their local school district or state Gifted and Talented Programs office to obtain this information.

Children can take classes from various organizations that will support their math development. These organizations may offer classes during the summer or on the weekends. Some of the classes may teach children to build robots, toy cars, toy airplanes, etc. These classes may be in the area of ​​engineering, computer science, or some other technical field. Classes can be taught at various colleges or universities in the local area. This is community outreach for colleges and universities, but children will develop academic and social skills that carry over into their classroom and into adulthood.

In trying to develop good math students, all avenues should be tried. Parents can make additional progress by allowing children to visit workplaces that use a lot of math. Children should be exposed to as many races as possible. Careers in math and even science should be on your list of considerations. Parents should inform children which careers require them to have good math skills.

Parents who are positively involved with their children and want the best for them will ensure that their children keep up with their math skills and succeed in school. The strategies used in this article are a sample of the many ways that parents can ensure that their child is developing strong math skills. The number one way to help a child develop good math skills is to positively and actively involve their parents in their educational journey.

Health Fitness

Strength equipment for a commercial gym

admin

With thousands of exercise devices on the market, choosing equipment for a commercial gym can be challenging. It can be particularly difficult to determine what type of equipment to buy and how many of each to buy. Having the right mix of equipment is vital to having a successful gym or gym, so it’s well worth the time to sit down and find out the needs of gym clients. Commercial gymnasiums in schools may have different requirements than a hotel or condo complex, so developers should take this into account. For example, some centers may require a wide range of strength training equipment for more advanced athletes or bodybuilders, while others need more of the basics for beginners.

There are a few types of exercise equipment that every good mall or gym should have. Strength training equipment, such as weight machines or free weights, is a standard part of most gyms. For weight lifting, gym owners should consider including a bench press, a squat rack, and a leg press machine. If space and budget allow, additional strength training machines or stations can be added. There is a wide variety of equipment available to strengthen and tone specific parts of the body. Only one sample includes an incline bench press, bicep curl machine, leg extension machine, leg lift chair, power stand, or Smith machine. Racks and benches are essential for advanced users who will be lifting weights, as they are necessary for popular lifts like squats and bench presses.

All-in-one gyms that allow multiple exercises on a single piece of equipment are popular options for gyms with space restrictions. It is important to ensure that there is enough space around this equipment to ensure that each station can be used correctly. These machines come in many different sizes and configurations, often with a selection of weight stacks and accessories. Additionally, commercial gyms will require a large selection of weights, dumbbells, and weight bars in a wide range of weights. This will allow many users with different levels of strength and fitness to use the strength training equipment. A special section of the gym should be established for free weight exercises with a cushioned gym floor and adequate training space to ensure the client’s comfort and safety when exercising.

When purchasing these devices, it is important to choose higher quality commercial fitness equipment. This type of equipment is designed to withstand heavy and repeated use, and is much more durable than equipment designed for the home. While home equipment may be less expensive at first, it is more likely to break down in a high-use environment, resulting in high replacement costs. Also, pay attention to weight specifications when choosing equipment for a commercial gym. If the population using the center is large or obese, it is important to choose equipment specifically designed to handle heavier weights.

Finally, most gyms and fitness centers should have some cardio machines. The most popular cardio equipment is the treadmill. If space permits, consider more than one treadmill to minimize customer wait times. Other cardiovascular equipment to consider include elliptical cross trainers, exercise and recumbent bikes, stair climbers and stair climbers, and rowing machines. Again, buying commercial-grade versions of these products is recommended if the gym at the fitness center will be used by multiple people.

Legal Law

5 ways to make your girlfriend like Star Wars and 1 way to make her hate it

admin

While most of us are happy to sit back and watch Star Wars, the respective partners are not so willing. I know they ask me all the time why I like it so much. My friend doesn’t seem to understand why Star Wars movies are so good. So I decided to sit down with her and show her why she should like Star Wars as much as I do.

1. Harrison Ford. Most girls still think he’s hot. Yes, he sure is getting old today, but in the original trilogy he is still handsome. Also, if you tell her she takes her shirt off in The Empire Strike Back, she’ll just sit there and wait. Now we all know that he doesn’t actually take his shirt off, it just rips a little bit, but sometimes it is allowed to go overboard.

2. Ewoks. All girls like cute and cuddly things, and there is nothing cuter and cuter than an Ewok. I know you may not like those who want to be half Wookiee, but remember this is not about you. Tell the love of your life that if he likes them, you will get him an Ewok doll. I don’t know if you can, but you can tell him that you will try.

3. C3PO. Girls like gays. They see them as a male friend with female advice, and who fits that role better than C3PO. Once they know he’s gay, they’ll watch the whole movie laughing at his antics and hoping he finds another gay robot so they can live happily ever after.

4. Princess Leia. Girls love a great strong and tough female lead. They also love a soft, feminine character that they can relate to. Leia Organa has everything. She is tough but gentle, brave but scared. Tell your partner that you are a role model and someone you respect. That will earn you chocolate points every time. Show an intellectual side. Hey, lie if you have to, but remember we were trying to sit down and watch our favorite movie here.

5. Cry when Darth Vader dies. When Luke Skywalker removes his helmet, he sheds a tear. Show your girlfriend that you have a soft side. Girls like that. They may not feel the same way, but if it excites you, you will be able to see it more often.

Now that you’ve convinced her to like Star Wars, you don’t want to spoil it all by doing something stupid. Unfortunately, as men, we are almost pre-programmed to do stupid things, and what is the biggest mistake we can make when we watch Star Wars?

“Wow, Leia looks sexy in that slave outfit!”

And in an instant you’ve messed it up.

Of course, by saying all this, I have tried everything and still have not been able to convince her. Of course, it is better to try than simply fail.

Terry shadwell

PS: I know where you can get a Princess Leia slave outfit!

Lifestyle Fashion

The true meaning of snakes in a dream

admin

The symbol of the snake in a dream refers to many things. The color of the snake plays an important role in decoding this symbol in dreams. Seeing snakes coming your way or following you down a path says a lot about a person’s sexual feelings for you. Only when the snake transforms into human form, one will be able to realize who this person is and until then he will be subject to strong sexual currents from this person.

Dream about playing with snakes:

Playing with a snake speaks of the flirtatious attitude. Being chased by many snakes indicates that you are overwhelmed by sexual thoughts and are doing your best to free yourself from them. Bitten by a snake, he says that his vital forces will be depleted and he may even become ill for a few days. A doctor treating after being bitten by a snake says that a spirit guide is on the way to free you from sexual desires.

Snake at your door:

A military man who leaves a snake on your doorstep says that a war is being waged against you with the help of a person who can enslave you on his whims.

Dream of a snake entering the bathroom:

Dreaming of a snake entering your bathroom says that no matter how hard you try to purify yourself, negative forces always find a way to make you impure. The hiss of a deadly black venomous snake tells of a hyperacidity problem that can become chronic, if left unchecked.

Killing snakes in dreams:

Killing a snake or seeing someone kill it means that you will free yourself from all kinds of tensions and you will be surrounded by an aura of protection. snakes flying in the air and trying to reach you says that you are surrounded by many worldly problems and that they gained strength and are chasing you.

What do flying snakes represent in dreams?

If you are attacked by flying snakes, you have to put a lot of nasty things in waking life. Catching a snake in a dream and removing the poison from its glands means that you are blessed with superior spiritual power and with this spiritual power you can tame any beautiful man or woman and have full control over sensual pleasures.

Serpents burned in dreams of fire:

Seeing snakes killed by fire says that a strong detachment from all worldly things finally puts an end to all your troubles. This is the moment of self-realization and enlightenment. The soul is ready to receive messages from higher sources.

Great snake in dream:

If you see a large snake like ‘Anaconda’ in dreams, it says about a threat to life. If you kill him, you are out of danger. If he is furious, you will have a brush with death, but somehow you will make it out safely.

Snake transforming into a human being in dreams:

If you see a snake transform into a man, it says that the external sexual influence was greatly reduced. And it is time to regain strength again.

Snake in the bedroom:

To dream of a snake in the bedroom and if there are many people sleeping at that time, then it says that your mind will be poisoned by sexual thoughts for a short period of time, as long as you can locate and throw the snake out of the bedroom.